Industrial Magnetics Inc. (IMI) supplies a wide range of heavy-duty  and Industrial magnets for the removal of tramp metal, and the protection of your equipment. IMI utilizes 50 MgOe rated rare earth magnets, which are approximately 20 times stronger than old, ceramic magnets. IMI specializes in custom configurations.  CMT offers Drawer-in-Housing Conveyor Magnets, Suspended Magnets, In-Line Magnets, Extractor Magnets, Drum Magnets, Plate Magnets, Grate Magnets, Magnetic Separation Pulleys, Liquid Line Magnets and Manhole Cover Lift Systems.

Industrial Magnetics

Industrial and Heavy Duty Magnets

Drawer in Housing Industrial Conveyor Magnets

Drawer-in-Housing Industrial magnets
Get A Quote

These magnets are used to extract tramp metal from the conveying process. The material contacts the magnetic surface, making it the most efficient way of removing even the smallest ferrous particles from conveyor lines. Drawer-in-Housing Industrial Conveyor Magnets are specially designed for the separation of ferrous metal in dry processing systems. Drawer-in-Housing industrial magnets separate the metal through magnetic tubes assembled in a drawer. The Drawer-in-Housing Industrial Magnet’s tubes are aligned on alternating centers for multiple row drawer configurations making the product flow in a zig-zag pattern while contacting the magnetic tubes.

Suspended Overhead Industrial Magnets

Industrial Suspended Magnets
Get A Quote

These magnets are used for “over-the-belt” applications, to extract tramp metal from a bed of material.  Electromagnets and Permanent Magnets are used for this removal process. Suspended Overhead Industrial Magnets are used for the protection of  valuable processing equipment from ferrous metal damage. Suspended Overhead Industrial magnets increase the purity and quality for high volume products that are belt conveyed. The Suspended Overhead Industrial magnet has magnetic circuits that reach deep and provide unparalleled metal separation capabilities. Use the Suspended Overhead Industrial magnet prior to a metal detector in order to achieve maximum separation.

Pneumatic Conveying Line Magnets

Industrial In-Line Magnets
Get A Quote

CMT provides Pneumatic Conveying Line Magnets that extract particles of metal without restricting product flow.  The Pneumatic Conveying In-line magnets feature an aerodynamic cone that carries the material in a uniform flow around the outside of the magnetic tube.  This causes the ferrous material to be extracted from the product line, and sticks to the magnet until it is removed and disposed.  The Inline magnets feature a leak-resistant seal, EZ-Clean Stripper Sleeve, a door-mounted magnet for easy clean up, and stainless steel construction. CMT offers several different types of In-Line Pneumatic Conveying Line Magnets, such as the Bullet® Pneumatic Line Magnet, the Exposed Pole Tube Magnet, the Vacuum Line Magnet, and the Pipe Magnet.

Industrial Extractor Magnets and Split-Flow Magnets

Industrial Extractor Magnets
Get A Quote

CMT offers Industrial Extractor magnets and Split-Flow Magnets. The Extractor and Split-Flow Industrial Magnets are built for high-volume, dry material processing.  This industrial magnet’s minimal product intrusion aids in keeping  your material flowing at the desired rate, while still protecting your valuable equipment and removing unwanted ferrous material. The industrial Split-Flow Magnet is used in gravity or choke fed applications, in vertical chutes.  Split-Flow Magnets are used for 12’ x 12’ to 20’ x 20’ chute sizes. The industrial Extractor Magnet works much like the Split-Flow model, but has only 2 parallel magnets within the unit. Extractor Magnets are used for 8’ x 8’ to 10’ x 20’ chute sizes. Magnets are available in Self-Cleaning and EZ-Cleaning models for scheduled, automatic cleaning, or manual cleaning.

Industrial Drum Magnets

Industrial Drum Magnets
Get A Quote

Industrial Drum Magnets are useful in dry, free flowing applications, in order to remove tramp metal from your product flow.  This drum magnet was engineered to continuously self-cleaning. The Industrial Drum Magnet is made of powerful Ceramic or Rare Earth Permanent Magnet Material. CMT offers the Drum Magnet in a large selection of standard sizes with custom designs available. The Drum Magnet comes with sealed Bearings for Drum Support and Drive

Industrial Plate Magnets

Industrial Plate Magnets
Get A Quote

Plate Magnets are used in angled chute applications where product degradation occurs or could occur. CMT offers three types of plate magnets: Flush Face Plate Magnets, Exposed Pole Plate Magnets, and Spout Plate Magnets. Flush Face Plate Magnets are best used in above-the-flow chute or belt applications. Plate magnets deliver continuous magnetic protection for down stream processing equipment, when installed over the material flow. Exposed Pole Plate Magnets are best used in low to medium volume applications. Spout Plate Magnets are best used in high volume, below-the-flow applications. CMT offers Spout Plate Magnets with EZ-Clean and Self-Cleaning.

Industrial Grate Magnets

Industrial Grate Magnets
Get A Quote

CMT offers quality Grate Magnets, or “Hopper Magnets,” that are ideal for chutes, bins, bag dumps and hoppers. The Grate Magnets are offered in square or round tubes to suit the application.  On the grate magnet, 1” magnetic sections are placed on 2” centers, and attached to 1/8” thick support stringers. CMT also offers Round and Square Magnetic Tubes. Magnetic tubes are a great solution for custom metal separation projects, where a normal housing or grate unit cannot be applied.  The tapped mounting holes on the magnetic tubes make the magnet’s  installation easier. The magnetic tubes are available in Rare Earth and Ceramic models.

Magnetic Separation Pulleys

Industrial Separation Pulleys
Get A Quote

CMT offers a variety of powerful permanent Magnetic Separation Pulleys. The Magnetic Separation Pulleys are usually installed as head pulleys in applications with conveyor systems to improve product purity and protect valuable equipment from metal damage. The pure product that is conveyed is unaffected by the process. Magnetic Separation Pulleys are an effective way to remove tramp metal from a material flow, automatically and continuously.

Liquid Line Magnets

Industrial Liquid Line Magnets
Get A Quote

CMT offers different types of Liquid Line Magnets: Plate Style T-Trap Magnet, and Tube Style T-Trap Magnet. T-Trap Liquid Line Magnets protect pumps, screens, mills and other important and valuable equipment. These Liquid Line Magnets remove ferrous metals and work-hardened stainless impurities through either a mounted plate or series of magnetic tubes in the conveying line. The Liquid Line Magnet is easy to install, with clamp in or bolt in models. The liquid line magnet is designed for line pressure up to 200 psi and temperatures of up to 300�.

Manhole Cover Lift Systems

IMI Manhole Cover
Get A Quote

CMT sells quality Manhole Cover Lift systems that allow you to quickly, safely and magnetically remove and replace manhole covers. Removing and replacing manhole covers can now be easily accomplished with IMI’s Manhole Cover Lift System.  These industrial magnets have deep reaching strength that penetrates even textured surfaces, often found on manhole covers and sewer grates.  When the industrial magnet is attached, the manhole cover is removed with ease using a hoist or lift dolly.  CMT’s Manhole Cover Lift system significantly reduces the risk of injuries to employees, while efficiently using time and energy.

View Gallery

CMT Provides Free Plant Visits and Consultations!

Schedule Plant Visit
Call for more information
More Products
Bin Activators
Industrial Blenders and Mixers
Bulk Bag Systems
Industrial Dust Collectors
Bag Dump Stations
Industrial Material Feeders
Mechanical Conveyors
Pneumatic Conveyors
Silos and Tanks
Industrial Sizing Equipment
Tote IBC Systems
Conveying Elbows
Flexible Sleeves
Level Controls
Flow Aids
Gates and Valves
Venturi Eductors
Weighing Devices
bulk material handling header
bulk material handling solutions

[Home] [Manufacturers] [Equipment] [Components] [Literature] [Case Histories] [3Sigma] [About CMT] [Contact Us] 704-846-3737

bulk material handling footer

[Home] [Manufacturers] [Equipment] [Components] [Literature] [Case Histories] [Data Sheets] [3Sigma] [About CMT] [Contact Us] [KPB] 704-846-3737

Request a Quote

> Home



> Manufacturers

> Equipment

> Components

Blower Packages

Conveying Elbows

Flow Aids

Gates & Valves

Level Controls


> Drawer-in-Housing

> Suspended Magnets

> In-Line Magnets

> Extractor Magnets

> Drum Magnets

> Plate Magnets

> Grate Magnets

> Separation Pulley

> Liquid Line Magnets

> Manhole Cover Lift




> Literature

> Case Histories

> Videos

> Photo Gallery

> Testimonials



> About CMT

> Contact Us

> Partners